Our Best Selling Thermal DVD-R Disc!
River Media Professional Grade
- Capacity: 4.7 GB
- Speed: 16x
- Model No:5060158310821
- Surface: Silver lacquer, thermal printable. For all thermal printers except Rimage Everest & Teac P-55
- Dye: Purple, azo based
- Hub Printable: Yes
- Packaging: Shrink wrap
- Carton Quantity: 100
- Box Quantity: 600
Unlike a stamped DVD, DVD-Rs are manufactured with a spiral groove (like a phono disc) called the pregroove. It provides a precise track for the writing laser to follow. A DVD player depends on following the recorded track of pits in order to track the spiral path.
A slight wobble in the pregroove in a pre-established pattern generates a frequency used as
a carrier signal; the timing information helps regulate servo motors,
tracking of the laser assembly, and focus of the beam. Land pre-pits
molded into the substrate provide address information and pre-recorded
data, used to initiate write operations.
The larger storage capacity of a DVD-R compared to a CD-R is achieved through a smaller pit size and smaller track pitch of the groove spiral which guides the laser beam. Consequently, more pits can be written on the same physical sized disc. In order to write smaller pits onto the recording dye layer a red laser beam with a wavelength of 650 nm (for general use recordable DVD, versus a wavelength of 780 nm for CD-R) is used in conjunction with a higher numerical aperture lens. Because of this shorter wavelength DVD-Rs use different dyes from CD-R to properly absorb this wavelength.
DVD-R discs are composed of two 0.6 mm polycarbonate discs bonded with an adhesive to each other. One contains the laser guiding groove and is coated with the recording dye and a silver alloy or gold reflector. The other layer is an ungrooved "dummy" disc to assure mechanical stability of the sandwich structure and compatibility with the compact disc standard geometry which requires a total disc thickness of about 1.2 mm.
This sandwich structure helps protect the data containing layer from scratches by the thick "dummy" disk. Compared to a CD's 1.2 mm of polycarbonate, a DVD's laser beam only has to penetrate 0.6 mm of plastic in order to reach the dye recording layer, which allows the lens to focus the beam to a smaller spot size to write smaller pits.
DVD-R recording requires a more complex write strategy to establish the
appropriate lengths for the pits, which are approximately half the size of
those on a CD-R disc. The spacing between the pits and lands within the
spiral data pattern is also significantly less than on a CD-R disc.
for the extra precision required during write operations, the
laser pulses are very carefully controlled, both in terms of intensity and
duration. During recording, the laser is rapidly modulated between the
power setting required for writing and the setting used for reading to
avoid overheating the media surface and to regulate the size of the mark
seared in the dye. A technique known as Optimum Power Calibration
(OPC) is used to perform test write operations to a specified calibration
area on the recordable media surface and then to read back the test and adjust the laser power settings to match the recorder to the
media. Given the extra precision required for recordable operations
using DVD-R, this feature becomes a highly desirable addition to any
recorder and helps ensure the most consistent results when performing
What Makes River Media DVDRs the professionals best kept secret?
Error correction in DVD media is measured with PI and PO (parity inner and parity outer). Where as in CD error correction C1 errors that are not corrected become C2 errors, in DVD a uncorrected PI error becomes the more severe PO error. River Media DVDs are the culmination of many years of manufacturing and technical excellence. As a result the performance is second to none. Below are results from PI/PO scans of our DVD-R compared to a leading competitor.
River media printable surfaces
Recording performance has been heavily optimised and improved over
the years, as has the printable surfaces. River Media printable
disc surfaces feature:
- Extra fast dry inkjet surface - Dry to touch within
- No colour bleeding - Our inkjet formulae utilises special
pigment molecules which prevent colour bleeding
- Brilliant White - No off-white or cream finish, when we say
white we mean it!
- Thermal Surfaces Optimised for specific printers - River Media
offer dedicated discs for both full colour and mono printers
We're so confident in the quality of our media that should you not
be entirely satisfied we'll offer a full refund - no quibble.